亚洲精品无码一级|亚洲综合色区中文字幕|91在线免费视频观看|欧美福利视频一区二区精品|亚洲高潮无码喷水污污av|亚洲不卡无码av中文字幕|国产在线98福利播放视频免费|性色av一区二区三区人妻中出,天下 高月 小说,完美世界国际版下载,盗墓笔记小说

您好,歡迎訪問聚乙烯蠟_PE蠟實力廠家_成都盛騰飛揚環保新材料科技有限公司官網!
15882120791

聯系我們

成都盛騰飛揚環保新材料科技有限公司
郵箱:admin@admin.com
電話:15882120791
地址:成都市金堂縣淮口鎮節能環保產業園 在線咨詢

鋁酸酯偶聯劑

一、產品特點 1.無機粉體與樹脂之間的相容性不佳,經過鋁酸酯偶聯劑處理后無機粉體表面會與樹脂之間形成化學鍵,增強了無機粉體和樹脂之間的界面相容性, 因此使用鋁酸酯偶聯...
咨詢熱線:15882120791

產品介紹

一、產品特點

1.無機粉體與樹脂之間的相容性不佳,經過鋁酸酯偶聯劑處理后,無機粉體表面會與樹脂之間形成化學鍵,增強了無機粉體和樹脂之間的界面相容性, 因此使用鋁酸酯偶聯劑還可以加大無機粉體的用量,提升產品質量,降低成本。

2.促進填料在樹脂中的分散,改善制品的機械性能,如拉伸強度、沖擊強度、抗壓強度等。

3.該產品適用于各類填充母粒的生產,如碳酸鈣、滑石粉、硫酸鋇、硫酸鈉等填料的造粒,以及各類色母粒的生產。

二、產品性能及指標

熔點(℃)

降粘幅度(%)

分解溫度(℃

揮發物含量 (% )

外觀

70-80

≥98

270

≤1

白色固體

三、使用方法

第1步:在高速捏合機處于低速狀態下倒入填料,換高速加熱至110C,敞口攪拌5-8分鐘,使填料中的微量水分被充分蒸發,殘存水分應≤0.3%才能保證無機填料的活化效果;

第2步:將偶聯劑加入攪拌機內,加入量一般為填料量的1 -2% ,總的攪拌時間不得低于10分鐘,使填料充分活化;

第3步:加入填料量0.5%的硬脂酸作協同劑,再攪拌2分鐘即停機出料。

四、包裝與儲存

本產品為非危險品,請遠離火源存放。

每袋凈重: 25kg


One, product characteristics

1. The poor compatibility between inorganic powder and resin, by aluminate coupling agent treatment, the formation of chemical bond between the inorganic powder surface and resin, reinforced between inorganic powder and resin interface compatibility, so the use of aluminate coupling agent can also increase the amount of inorganic powder,improve product quality, to reduce the cost.

2. To promote the dispersion of filler in the resin, improve the physical and mechanical properties of products, such as tensile strength, impact strength, compressive strength and so on.

3. The product is suitable for all kinds of filling masterbatch production, such as calcium carbonate, talc powder, barium sulfate, sodium sulfate, granulation filler, and the production of various kinds of color masterbatch.

Two, product performance and indicators

Melting point

Viscosity reduction range

Decomposition temperature

Volatile content

surface

70-8-

≥98

270

≤1

White powder

Three, the use of methods

1. In the high-speed kneading machine in low speed state into the filler, high-speed turn heating to 110 C, stirring exposure bake for 5-8 minutes, the trace water in the packing is fully evaporated, the remaining water should be less than or equal to 0.3% in order to ensure the quality of activated inorganic filler;

2. 2. The coupling agent into the mixer,the amount is generally1-2% of the amount of filler,the total stirring time shall not be less than 10 minutes, so that the filer fully activated;

3. Adding0.5% stearic acid as the synergist, stirring for 2 minutes, then stop discharging

Four, packaging and storage

This product should be stored in the ventilated and dry place, pay attention to moistureproof and fireproof, and the shelf life is 6 months

Net weight per bag: 25kg


15882120791